# Periodic membership dues

**URL:** <https://www.dolibarr.org/forum/t/periodic-membership-dues/16691>\
**Category:** Using my Dolibarr\
**Created:** [June 12, 2018, 6:48am UTC](https://www.dolibarr.org/forum/t/periodic-membership-dues/16691 "2018-06-12T06:48:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![gsus84](https://www.dolibarr.org/forum/letter_avatar_proxy/v4/letter/g/f6c823/32.png) [@gsus84](https://www.dolibarr.org/forum/u/gsus84)\
**Post date:** [June 12, 2018, 6:48am UTC](https://www.dolibarr.org/forum/t/periodic-membership-dues/16691/1 "2018-06-12T06:48:40Z")

</div>

Hi, there,

I am part of an association (we are about 300 people associated) and we are thinking of using Dolibarr.

Bimonthly we pass on the membership fee for bank direct debit.

I have been able to test the application and it seems that it is advisable to create members and create a " affiliation " (“afiliación” in spanish) for every fee paid.

My questions are:  
Is it possible to do this process without having to do it member by member?  
In our case, most of them have the same quota, but there are special cases where there are more or less of them.  
I know that there is the possibility of entering custom fields. Would it be possible to define in each member what is the fee they pay through one of these fields?

Thank you…

---

<div class="post-metadata">

**Author:** ![abu](https://www.dolibarr.org/forum/letter_avatar_proxy/v4/letter/a/f19dbf/32.png) [@abu](https://www.dolibarr.org/forum/u/abu)\
**Post date:** [June 4, 2020, 8:13am UTC](https://www.dolibarr.org/forum/t/periodic-membership-dues/16691/2 "2020-06-04T08:13:38Z")

</div>

Did you reach any conclusion here?

---

<div class="post-metadata">

**Author:** ![gsus84](https://www.dolibarr.org/forum/letter_avatar_proxy/v4/letter/g/f6c823/32.png) [@gsus84](https://www.dolibarr.org/forum/u/gsus84)\
**Post date:** [June 4, 2020, 1:31pm UTC](https://www.dolibarr.org/forum/t/periodic-membership-dues/16691/3 "2020-06-04T13:31:48Z")

</div>

No. We are using another software solution.
